8 7 GfsSimulation GfsBox GfsGEdge {} {

  # Stop the simulation at t = 15
  Time { end = 15 }

  # Use an initial refinement of 6 levels (i.e. 2^6=64x64 for each box)
  Refine 6

  # Insert the solid boundary defined as x*x + y*y - 0.0625*0.0625 = 0
  # (i.e. a cylinder of radius 0.0625 centered on the origin)
  Solid (x*x + y*y - 0.0625*0.0625)

  # Add a passive tracer called T
  VariableTracer {} T

   # Add diffusion to tracer T
  SourceDiffusion {} T 0.001

  # Dirichlet boundary condition for T on the cylinder
  SurfaceBc T Dirichlet 1

  # Set the initial x-component of the velocity to 1
  Init {} { U = 1 }

  # Adapt the mesh using the vorticity criterion at every timestep
  # down to a maximum level of 6 and with a maximum tolerance of 1e-2
  AdaptVorticity { istep = 1 } { maxlevel = 6 cmax = 1e-2 }

  # Adapt the mesh using the gradient criterion on variable T at
  # every timestep, down to a maximum level of 6 and with a maximum tolerance of 1e-2
  AdaptGradient { istep = 1 } { maxlevel = 6 cmax = 1e-2 } T

  # Set a viscosity source term on the velocity vector with x-component U
  # The Reynolds number is Re = D*U/Nu = 0.125*1/0.00078125 = 160
  # where D is the cylinder diameter (as defined in cylinder.gts)
  SourceDiffusion {} U 0.00078125
  SourceDiffusion {} V 0.00078125

  # Writes the time and timestep every 10 timesteps on standard error
  OutputTime { istep = 10 } stderr

  # Writes the simulation size every 10 timesteps on standard error
  OutputBalance { istep = 10 } stderr

  # Writes info about the convergence of the Poisson solver on standard error
  OutputProjectionStats { istep = 10 } stderr

  # Pipes a bitmap PPM image representation of the T field at every other timestep
  # into a conversion pipeline to create a MPEG movie called t.mpg
  # Sets the minimum used for colormapping to 0 and the maximum to 0.4
  OutputPPM { istep = 2 } { ppm2mpeg > t.mpg } {
    min = 0 max = 0.4 v = T
  }

  # Pipes a bitmap PPM image representation of the T field at time 15
  # into the ImageMagick converter "convert" to create the corresponding EPS file
  OutputPPM { start = 15 } { convert -colors 256 ppm:- t.eps } {
    min = 0 max = 0.4 v = T
  }

  # Outputs profiling information at the end of the simulation to standard error
  OutputTiming { start = end } stderr

}
GfsBox {
  # Left boundary on the leftmost box is:
  #   Dirichlet U=1 for the x-component of the velocity
  left = Boundary {
    BcDirichlet U 1
  }
}
GfsBox {}
GfsBox {}
GfsBox {}
GfsBox {}
GfsBox {}
GfsBox {}
# Right boundary on the rightmost box is outflow
GfsBox { right = BoundaryOutflow }
# All the boxes are linked by left to right links
1 2 right
2 3 right
3 4 right
4 5 right
5 6 right
6 7 right
7 8 right